Communicate with Supplier? Supplier
Iris Ms. Iris
What can I do for you?
Chat Now Contact Supplier
Hebei Liston Lifting Rigging Manufacturing Co., Ltd.
Home > Industry Information > Three common pulls of NGK aluminum lever hoist
Online Service
Iris

Ms. Iris

Leave a message
Contact Now

Three common pulls of NGK aluminum lever hoist

2018-08-21
When customers use NGK aluminum alloy lever hoists, the three common trigger failures are unmovable, large resistance to pull, and the card chain. Based on these three failures, we provide the following solutions for everyone.
First of all, the handle of the NGK aluminum alloy Lever Hoist cannot be pulled, mainly because the chain is stuck. Therefore, before we use it, we must do a good job of inspection. After a short period of time, your work efficiency will increase several times.
Secondly, the resistance to pulling is large. The reason for the high resistance may be due to the deformation of the pinion or serious wear of the gear. These problems require professional maintenance personnel to help you repair.
In the end, the most common reason for the card chain is the rusting of the components. Of course, the breakage of the Lifting Chain and the damage of the lifting sprocket are also the main reasons for the card chain.
NGK aluminum alloy plate hoist flip failure you have made it clear? We must be familiar with the solutions to these failures. If you have any problems that cannot be solved, please contact us!

Home

Phone

Skype

Inquiry