Communicate with Supplier? Supplier
Iris Ms. Iris
What can I do for you?
Chat Now Contact Supplier
Hebei Liston Lifting Rigging Manufacturing Co., Ltd.
Home > Industry Information > Shackle safety use
Online Service
Iris

Ms. Iris

Leave a message
Contact Now

Shackle safety use

2018-10-20
different types shackle

Shackles, rings, eye hooks, rope cards, clamps, etc. are the main end fittings that make up the slings and spreaders. Correct use or not directly relates to the carrying safety of spreaders and riggings.

Accessories requirements:

● Must be manufactured by a professional manufacturer according to the corresponding standards

● Technical parameters should have a rated load

● According to the provisions of the safety factor of not less than 4

Shackle (U-shaped card, snap ring)

Shackles are divided into two types: D-type and bow-type. They can be used as end fittings to directly lift items, and also can be used as flexible rigging connectors. More product specifications, generally based on the actual use of the situation, according to the shackle's rated load selection. WII indicates the rated load.

Shackle models are manufactured according to the national standard, and some are manufactured according to American, Japanese, and Australian standards.

The national standard model is directly marked with the rated load.

American standard models directly mark the inch and rated load. For example, the model number is 1 1/2 and the rated load is 17 tons.

Shackle scrapping standards:

1. There is obvious permanent deformation or the shaft pin can not rotate freely.

2. The wear amount of the cross-section of the buckle body and the shaft pin is more than 10% of the original size.

3. Any cracks appear on the shackle.

4. The shackle cannot be locked.

5. Unqualified after shackle test.

6. If there is a large area of corrosion or rust on the shackle body and shaft pin, it should be scrapped immediately.

Previous: H-type clamp and hook hook clamp

Next: Electric hoist scrap standards

Home

Phone

Skype

Inquiry