Communicate with Supplier? Supplier
Iris Ms. Iris
What can I do for you?
Chat Now Contact Supplier
Hebei Liston Lifting Rigging Manufacturing Co., Ltd.
Home > Industry Information > Air Hydraulic Jack
Online Service

Ms. Iris

Leave a message
Contact Now

Air Hydraulic Jack


Air Hydraulic Jack


1.Connect adequate air source to the air supply inlet(Air pressure 0.9-1.2Mpa)

2.Turn the control valve clockwise until the pump starts.

3.Transfer the load immediately to appropriately rated jack stands.


1.Raise load high enough to clear the jack stands.

2.Remove jack stands carefully(always used in pairs).

3.Slowly turn handle knob counter-clockwise, if the load fails to lower:
(a).Use another jack to raise the vehicle high enough to reinstall jack stands.

(b).Remove the malfunction jack and then jack stands.

(c).Use the functioning jack to lower the vehicle.

4.After removing jack from under the vehicle, fully retract the jack to reduce ram exposure to rust and contamination.

hydraulic jack (4)

Previous: Endless Polyester Round Sling

Next: VITAL Lever Block